John's Old Mercury Q&A Board

John's Old Mercury Q&A Board
Has moved to a new home
Click here

This page was last updated: 03-Jan-2009 18:35:36

Board has moved to new site - please click on hyperlink to go there!!! - Site Administrator 03-Jan-2009 18:35:36 (0)

Smooth Running Mark 400 For Sale - Gary Peterson 03-Jan-2009 17:49:24 (0)

Prop nut removal - ed 01-Jan-2009 14:51:50 (1)

Re: Prop nut removal - JW in Dixie 01-Jan-2009 16:20:15 (0)

parting out - Dick S 01-Jan-2009 13:40:37 (1)

Re: parting out - Bill W 01-Jan-2009 20:49:57 (0)

Anaerobic Sealer - J White 01-Jan-2009 13:15:25 (7)

Re: Anaerobic Sealer - George Garland 01-Jan-2009 13:26:06 (6)

Re: Anaerobic Sealer - proffessor 01-Jan-2009 14:54:17 (5)

Re: Anaerobic Sealer...Had hothing but grief with this stuff!!!!!!!! - Don Muncie 02-Jan-2009 15:28:35 (4)

Re: Anaerobic Sealer...Had hothing but grief with this stuff!!!!!!!! - Larry McAfee 02-Jan-2009 19:32:07 (2)

Re: Anaerobic Sealer...Had hothing but grief with this stuff!!!!!!!! - proffessor 02-Jan-2009 22:59:04 (1)

Re: Anaerobic Sealer...Had hothing but grief with this stuff!!!!!!!! - Larry Mac 03-Jan-2009 17:12:00 (0)

Re: Anaerobic Sealer...Had hothing but grief with this stuff!!!!!!!! - George Garland 02-Jan-2009 16:29:13 (0)

Mercury Model 40 - Gerry 01-Jan-2009 09:46:37 (1)

Re: Mercury Model 40 - jack 01-Jan-2009 09:51:48 (0)

Happy New Year - Ronald 01-Jan-2009 07:49:02 (0)

Problem on the new board - George Garland 29-Dec-2008 21:49:45 (2)

Re: Problem on the new board - Dick Gorz 30-Dec-2008 10:44:28 (1)

Re: Problem on the new board - George Garland 30-Dec-2008 12:34:10 (0)

Link to rotary stuff for Bobby - Sam Cullis 29-Dec-2008 18:50:30 (0)

i forgot my password info - jack brown 29-Dec-2008 14:18:43 (3)

Re: i forgot my password info - Dick Gorz 29-Dec-2008 14:37:56 (0)

Re: i forgot my password info - Michael 29-Dec-2008 14:30:28 (1)

Re: i forgot my password info - jack brown 29-Dec-2008 15:57:58 (0)

New board, link failures - Sam Cullis 29-Dec-2008 12:58:10 (6)

Re: New board, link failures - Jim Sgrig 29-Dec-2008 16:48:57 (0)

Re: New board, link failures - Dick Gorz 29-Dec-2008 14:47:04 (2)

Re: New board, link failures - George Garland 29-Dec-2008 18:37:46 (0)

Re: New board, link failures - Sam Cullis 29-Dec-2008 17:45:53 (0)

Re: New board, link failures - Michael 29-Dec-2008 13:05:42 (1)

Re: New board, link failures - George Garland 29-Dec-2008 13:34:41 (0)

new site - Dale Borum 29-Dec-2008 12:25:46 (2)

Re: new site - Michael 29-Dec-2008 13:08:55 (0)

Re: new site - JW in Dixie 29-Dec-2008 12:59:52 (0)

new site sign in - Rick 29-Dec-2008 07:59:58 (1)

Re: new site sign in - Dick Gorz 29-Dec-2008 08:52:41 (0)

new board vs. old board - Frank 28-Dec-2008 23:12:17 (5)

Re: new board vs. old board - Sam Cullis 28-Dec-2008 23:20:16 (4)

Re: new board vs. old board - George Garland 29-Dec-2008 07:52:17 (3)

Re: new board vs. old board - Jim Sgrig 29-Dec-2008 16:51:28 (0)

Re: new board vs. old board - George Garland 29-Dec-2008 08:01:14 (1)

Re: new board vs. old board - Don Muncie 29-Dec-2008 13:09:25 (0)

lost posts - MartyA 28-Dec-2008 11:18:43 (4)

Re: lost posts - MartyA 28-Dec-2008 17:53:22 (0)

Re: lost posts - Michael 28-Dec-2008 11:56:15 (2)

Re: lost posts - MartyA 28-Dec-2008 13:53:02 (0)

Re: lost posts - Ed Hatch 28-Dec-2008 12:17:21 (0)

Jack: Start running! - Fastjeff 28-Dec-2008 10:59:42 (6)

Re: Jack: Start running! - TerryM 28-Dec-2008 21:26:30 (1)

I do too. - Fastjeff 29-Dec-2008 05:14:33 (0)

Re: Jack: Start running! - jack 28-Dec-2008 20:29:18 (3)

Re: Jack: Start running! - LarryR 29-Dec-2008 05:46:43 (0)

I too will use for my TWINS, but... - Fastjeff 29-Dec-2008 05:13:09 (1)

Re: I too will use for my TWINS, but... - proffessor 29-Dec-2008 11:23:55 (0)

We seem to have lost all the postings! - Dick Gorz 28-Dec-2008 10:53:07 (4)

Re: We seem to have lost all the postings! - Don Muncie 28-Dec-2008 11:46:31 (1)

Re: We seem to have lost all the postings! - Michael 28-Dec-2008 11:50:45 (0)

Re: We seem to have lost all the postings! - Sam Cullis 28-Dec-2008 11:10:40 (0)

??? Stuff is still there for me. ???(NT) - popdude 28-Dec-2008 11:00:59 (0)

RRwfACAjVxNZPsg - Cytapaq 28-Dec-2008 09:33:01 (0)

New Board is ready for testing (I think) - Dick Gorz 28-Dec-2008 09:21:30 (0)

Where's our spam fighters? - Fastjeff 28-Dec-2008 05:29:33 (0)

Quieting Mercs - popdude 27-Dec-2008 21:20:18 (3)

Re: Quieting Mercs - Kirk out East... 28-Dec-2008 06:42:44 (0)

IDEA.. - bobvdinghyracer 27-Dec-2008 21:32:12 (1)

Me too. - Fastjeff 28-Dec-2008 05:28:31 (0)

Throttle shaft - John Bennigf 27-Dec-2008 20:48:48 (0)

A B quicky - dave bernard 27-Dec-2008 17:06:59 (0)

Exhaust tuning on big V-6 Mercs - Fastjeff 27-Dec-2008 15:19:28 (7)

Re: Exhaust tuning on big V-6 Mercs - George Stillwill 27-Dec-2008 17:29:47 (0)

Re: Exhaust tuning on big V-6 Mercs - Don Muncie 27-Dec-2008 17:09:55 (5)

Re: Exhaust tuning on big V-6 Mercs - Frank 27-Dec-2008 18:47:35 (0)

Re: Exhaust tuning on big V-6 Mercs: Fred Hauenstein - Sam Cullis 27-Dec-2008 18:28:47 (2)

Re: Exhaust tuning: Fred Hauenstein..Stuff Not Known? - Don Muncie 27-Dec-2008 20:04:20 (1)

Re: Exhaust tuning: Fred Hauenstein..Stuff Not Known? - Sam Cullis 27-Dec-2008 20:47:40 (0)

Re: Exhaust tuning on big V-6 Mercs - Sam Cullis 27-Dec-2008 18:27:38 (0)

Merc 800EL DR - Louis in SE Michigan 27-Dec-2008 14:11:58 (1)

Re: Merc 800EL DR - Don Muncie 27-Dec-2008 17:05:50 (0)

Quieting down the Mk30?? - John 27-Dec-2008 07:32:40 (5)

Re: Quieting down the Mk30?? - Fastjeff 27-Dec-2008 10:24:28 (4)

Re: Quieting down the Mk30?? - Shawn 27-Dec-2008 11:19:49 (3)

Re: Quieting down the Mk30?? - JW in Dixie 27-Dec-2008 13:07:05 (2)

Re: Quieting down the Mk30??..a history of complaints! - Don Muncie 27-Dec-2008 13:54:26 (1)

Re: Quieting down the Mk30??..a history of complaints! - Shawn 27-Dec-2008 15:13:43 (0)

Harry Brinkman's Book - Fastjeff 27-Dec-2008 04:45:29 (4)

Re: Harry Brinkman's Book - Sam Cullis 27-Dec-2008 10:46:25 (3)

Re: Harry Brinkman's Book - Fastjeff 27-Dec-2008 13:00:55 (0)

Re: Harry Brinkman's Book - Michael 27-Dec-2008 11:12:12 (1)

Re: Harry Brinkman's Book..what I have discovered. - Don Muncie 27-Dec-2008 13:38:50 (0)

MK55 - Dave Roxin 26-Dec-2008 20:57:21 (4)

Re: Mark 55 mods - Fastjeff 27-Dec-2008 04:39:09 (0)

Re: MK55 - Ed Hatch 26-Dec-2008 21:14:54 (2)

Re: MK55 - George Stillwill 27-Dec-2008 05:24:33 (1)

Re: MK55,,,thew right things to do! - Don Muncie 27-Dec-2008 10:06:46 (0)

OMC Rotary - Bobby 26-Dec-2008 15:14:39 (0)

MK 78 Distributor Adjustments - Danny Nagasaki 26-Dec-2008 09:52:58 (12)

Re: MK 78 Distributor Adjustments - terrym 27-Dec-2008 09:02:18 (2)

Re: MK 78 Distributor Adjustments - Don Muncie 27-Dec-2008 10:13:13 (1)

Timing comes first; dwell second(NT) - Fastjeff 27-Dec-2008 10:25:13 (0)

Re: MK 78 Distributor Adjustments - dave bernard 26-Dec-2008 15:34:41 (0)

Re: MK 78 Distributor Adjustments - PNW Thom 26-Dec-2008 14:57:22 (0)

Re: MK 78 Distributor Adjustments - Tim Holm 26-Dec-2008 13:57:44 (1)

Re: Thanks everybody, you've been a huge help! (nt) - Danny Nagasaki 27-Dec-2008 10:13:12 (0)

Re: MK 78 Distributor Adjustments - Michael 26-Dec-2008 13:39:43 (0)

Re: MK 78 Distributor Adjustments - Fastjeff 26-Dec-2008 12:22:04 (3)

Re: MK 78 Distributor Adjustments: CRITICAL!!!!!!!!!! - Don Muncie 26-Dec-2008 13:28:51 (2)

Re: MK 78 Distributor Adjustments: CRITICAL!!!!!!!!!! - Sam Cullis 26-Dec-2008 15:06:49 (1)

Re: MK 78 Distributor Adjustments: CRITICAL!!!!!!!!!! - Don Muncie 26-Dec-2008 17:27:08 (0)

WA-25 VS Mk30 - bob 26-Dec-2008 09:43:04 (4)

Re: WA-25 VS Mk30 - Ken B. 26-Dec-2008 12:41:22 (2)

Re: WA-25 VS Mk30 - bob 26-Dec-2008 15:06:05 (1)

Re: WA-25 VS Mk30 - Ken B. 26-Dec-2008 15:27:51 (0)

Re: WA-25 VS Mk30 - Fastjeff 26-Dec-2008 09:49:55 (0)

xmas gift - dave bernard 25-Dec-2008 16:40:17 (13)

Re: xmas gift - Ken B. 25-Dec-2008 22:48:56 (4)

Re: xmas gift - bsplit 26-Dec-2008 23:12:58 (0)

Re: xmas gift - dave bernard 26-Dec-2008 06:54:09 (0)

Re: xmas gift - Fastjeff 26-Dec-2008 06:01:10 (1)

Re: xmas gift - Conrad 26-Dec-2008 09:15:27 (0)

Re: xmas gift - Glenn 25-Dec-2008 20:32:11 (0)

So, Santa was good to you! - Fastjeff 25-Dec-2008 18:54:02 (0)

Re: xmas gift - Ronald 25-Dec-2008 16:43:17 (5)

Re: xmas gift - dave bernard 25-Dec-2008 19:26:35 (1)

Posting photos - Fastjeff 25-Dec-2008 21:01:30 (0)

Re: xmas gift - MikeH 25-Dec-2008 18:52:29 (2)

Re: xmas gift - Craig Waters 25-Dec-2008 20:34:25 (1)

Re: xmas gift - Don Muncie 25-Dec-2008 23:15:47 (0)

Reed adjustments - Fastjeff 25-Dec-2008 14:36:37 (7)

Re: Reed adjustments - Don Muncie 25-Dec-2008 15:53:28 (6)

Re: Reed adjustments - jack 27-Dec-2008 01:26:57 (2)

Jack - Fastjeff 27-Dec-2008 04:37:04 (1)

Re: Jack hope it works - jack 27-Dec-2008 21:29:14 (0)

Re: Reed adjustments - J White 25-Dec-2008 18:11:16 (2)

Re: Reed adjustments - George Stillwill 25-Dec-2008 21:09:28 (1)

Re: Reed adjustments - Sam Cullis 25-Dec-2008 21:16:46 (0)

Turbo 200 merc 25ss - Shawn 24-Dec-2008 15:25:47 (14)

Re: Turbo 200 merc 25ss - Sam Cullis 24-Dec-2008 20:17:37 (0)

Re: Turbo `s on 2 strokes - bobvdinghyracer 24-Dec-2008 16:54:13 (0)

Re: Turbo 200 merc 25ss - Fastjeff 24-Dec-2008 16:27:13 (11)

Re: Turbo 200 merc 25ss - Shawn 24-Dec-2008 16:51:44 (10)

Re: Turbo 200 merc 25ss - George Stillwill 24-Dec-2008 17:30:02 (9)

Re: Turbo 200 merc 25ss - Sam Cullis 24-Dec-2008 23:12:58 (0)

Re: turbo 44 been done, no problem - Sam Cullis 24-Dec-2008 20:10:18 (7)

Re: turbo 44 been done, no problem - bobvdinghyracer 24-Dec-2008 22:37:35 (1)

Re: turbo 44 been done, no problem - Fastjeff 25-Dec-2008 05:21:49 (0)

Re: turbo 44 been done, no problem - Shawn 24-Dec-2008 22:10:40 (4)

Re: small turbos on eBay - Sam Cullis 24-Dec-2008 23:14:51 (3)

Merry Christmas, Sam. Here's your present! - Fastjeff 25-Dec-2008 05:26:00 (2)

Another link, to show it's size! - Shawn 25-Dec-2008 08:23:53 (1)

Even easier! - Fastjeff 25-Dec-2008 09:16:26 (0)

MK7 orginal? - J White 24-Dec-2008 15:17:31 (4)

Re: MK7 orginal? - Speedliner 25-Dec-2008 06:51:31 (0)

Re: MK7 orginal? - Richard G 24-Dec-2008 20:59:16 (0)

Re: MK7 orginal? - dave bernard 24-Dec-2008 20:08:34 (0)

Re: MK7 orginal? - LarryR 24-Dec-2008 16:55:13 (0)

Carbon Steel to SS - John 24-Dec-2008 14:36:08 (12)

Re: Carbon Steel to SS - PNW Thom 24-Dec-2008 21:21:29 (1)

1976 Merc 200 - Fastjeff 25-Dec-2008 05:19:51 (0)

Re: Carbon Steel to SS - Dr Freshwaters 24-Dec-2008 14:55:25 (9)

My 2 cents - Kirk out East... 26-Dec-2008 07:16:19 (0)

Re: Carbon Steel to SS - LarryR 24-Dec-2008 16:59:55 (7)

Re: Carbon Steel to SS - Louis Doering 24-Dec-2008 17:24:19 (1)

Re: Carbon Steel to SS - Fastjeff 24-Dec-2008 19:31:21 (0)

Re: Carbon Steel to SS - George Garland 24-Dec-2008 17:14:08 (4)

Re: Carbon Steel to SS - LarryR 25-Dec-2008 09:48:56 (1)

Answer: 336(NT) - Fastjeff 25-Dec-2008 14:34:38 (0)

Re: Carbon Steel to SS - Don Muncie 24-Dec-2008 17:41:36 (1)

Re: Carbon Steel to SS - proffessor 25-Dec-2008 08:13:13 (0)

Starter center screw - John Bennig 24-Dec-2008 13:49:46 (3)

Re: Starter center screw - Richard G 24-Dec-2008 21:02:34 (1)

Re: Starter center screw - dave bernard 24-Dec-2008 21:22:23 (0)

Re: Starter center screw - Ronald 24-Dec-2008 18:51:18 (0)

Merry Christmas - John Bennig 24-Dec-2008 10:05:36 (10)

Re: Merry Christmas - Bill Morel 24-Dec-2008 11:04:08 (0)

Re: Merry Christmas - Fastjeff 24-Dec-2008 10:22:42 (8)

Re: Merry Christmas - J White 24-Dec-2008 22:10:46 (7)

Re: Merry Christmas - jack 25-Dec-2008 07:37:04 (6)

Harry Brinkman's book - Fastjeff 25-Dec-2008 09:14:04 (5)

Re: Harry Brinkman's book - dave bernard 25-Dec-2008 13:25:20 (0)

Re: Harry Brinkman's book - LarryR 25-Dec-2008 09:52:15 (0)

Re: Harry Brinkman's book - Don Muncie 25-Dec-2008 09:44:33 (2)

Don.... - Fastjeff 25-Dec-2008 14:33:35 (0)

Re: Harry Brinkman's book - dave bernard 25-Dec-2008 13:24:52 (0)

quicky gearbox...SAM / VAL OR ..?? - bobvdinghyracer 23-Dec-2008 21:30:18 (3)

Re: quicky gearbox...SAM / VAL OR ..?? - vald 24-Dec-2008 03:27:05 (1)

Re: quicky gearbox...SAM / VAL OR ..?? - bobvdinghyracer 24-Dec-2008 23:30:49 (0)

Re: quicky gearbox...SAM / VAL OR ..?? - Sam Cullis 23-Dec-2008 21:46:36 (0)

It is better to receive!...(Off Topic, kinda) - Don Muncie 23-Dec-2008 17:10:53 (10)

Re: Hey Don - Mikey 24-Dec-2008 15:23:00 (0)

Re: It is better to receive!...(Off Topic, kinda) - Bill Morel 24-Dec-2008 11:17:46 (2)

Re: It is better to receive!...Bill, nothing like Job. - Don Muncie 24-Dec-2008 14:59:43 (1)

Re: It is better to receive!...Bill, nothing like Job. - Conrad 24-Dec-2008 16:55:18 (0)

Re: It is better to receive!...(Off Topic, kinda) - Danny Nagasaki 23-Dec-2008 20:46:19 (0)

Re: It is better to receive!...(Off Topic, kinda) - Michael 23-Dec-2008 17:38:57 (0)

Re: It is better to receive!...(Off Topic, kinda) - dave bernard 23-Dec-2008 17:15:57 (0)

Re: It is better to receive!...(Off Topic, kinda) - Fastjeff 23-Dec-2008 17:15:40 (2)

Re: It is better to receive!...(Off Topic, kinda) - Crosbyman 24-Dec-2008 14:43:25 (0)

Re: It is better to receive!...(Off Topic, kinda) - Buzz Lindberg 23-Dec-2008 19:14:07 (0)

mk25 crankcases - vald 23-Dec-2008 16:34:30 (4)

Re: mk25 crankcases - dave bernard 23-Dec-2008 16:51:56 (3)

Re: mk25 crankcases - Ron Thomas 23-Dec-2008 20:41:59 (2)

Re: mk25 crankcases - vald 24-Dec-2008 03:44:01 (1)

Re: mk25 crankcases - George Stillwill 24-Dec-2008 07:14:05 (0)

yamato foot - MikeH 22-Dec-2008 16:44:13 (5)

Re: yamato foot - Ronald 22-Dec-2008 16:52:36 (4)

Re: yamato foot..the adaptor plate will work... - Don Muncie 22-Dec-2008 17:24:17 (3)

Re: yamato foot..the adaptor plate will work... - MikeH 22-Dec-2008 17:35:11 (2)

Re: yamato foot..the adaptor plate will work... - Sam Cullis 22-Dec-2008 18:36:41 (1)

Re: yamato foot..the adaptor plate will work... - bh/ 22-Dec-2008 18:59:57 (0)

Hone question? - J White 22-Dec-2008 15:38:23 (14)

Re: Hone question? - LarryR 23-Dec-2008 12:05:03 (1)

Re: Hone question? - Michael 23-Dec-2008 12:40:45 (0)

Re: Hone question? - Larry Mac 22-Dec-2008 22:09:35 (7)

Re: Hone question?... give the measuring job to the wife - George Garland 23-Dec-2008 12:17:36 (1)

Re: Hone question?... give the measuring job to the wife - Fastjeff 23-Dec-2008 13:01:02 (0)

Re: Hone question? - J White 23-Dec-2008 00:21:38 (2)

Re: Hone question? - proffessor 23-Dec-2008 05:08:12 (1)

Re: Hone question? - J White 23-Dec-2008 15:05:06 (0)

Re: Hone question? - Frank 22-Dec-2008 23:26:33 (1)

Re: Hone question? - Larry Mac 23-Dec-2008 12:51:08 (0)

Re: Hone question?..depends on the hone - Don Muncie 22-Dec-2008 17:22:21 (3)

Re: Hone question?..depends on the hone - alanaker 22-Dec-2008 17:39:50 (2)

Re: Hone question?..depends on the hone - Don Muncie 22-Dec-2008 18:53:16 (1)

Re: Hone question?..depends on the hone - Shawn 24-Dec-2008 18:27:30 (0)

More parts - John 22-Dec-2008 09:38:20 (1)

Re: More parts - Mike Fogarty 23-Dec-2008 12:37:17 (0)

upper and lower seals for mk20 - vald 22-Dec-2008 07:53:52 (1)

Re: upper and lower seals for mk20 - AllanF 22-Dec-2008 11:05:44 (0)

SKF 6205 roller bearing source - vald 21-Dec-2008 18:23:25 (7)

Re: SKF 6205 roller bearing source - Don Muncie 21-Dec-2008 20:05:20 (0)

Re: SKF 6205 roller bearing source - George Stillwill 21-Dec-2008 19:22:09 (0)

Re: SKF 6205 roller bearing source - MikeH 21-Dec-2008 19:15:46 (1)

Re: SKF 6205 roller bearing source - George Garland 21-Dec-2008 19:50:47 (0)

Re: SKF 6205 roller bearing source - Buzz Lindberg 21-Dec-2008 18:51:52 (2)

Re: SKF 6205 roller bearing source - LarryR 22-Dec-2008 05:45:37 (0)

Re: SKF 6205 roller bearing source - proffessor 21-Dec-2008 20:38:53 (0)

lower unit Merc 500 - Dale Borum 21-Dec-2008 17:28:46 (3)

Re: lower unit Merc 500 - dave bernard 21-Dec-2008 17:52:55 (2)

Re: lower unit Merc 500 - Don Muncie 21-Dec-2008 20:00:28 (1)

Re: lower unit Merc 500 - Dale Borum 23-Dec-2008 09:59:07 (0)

Driveshaft - krazy karl 21-Dec-2008 15:55:33 (16)

Re: Driveshaft - bobvdinghy racer 21-Dec-2008 17:10:35 (0)

Re: Driveshaft - Shawn Cavanaugh 21-Dec-2008 16:06:16 (14)

Re: Driveshaft - Larry McAfee 21-Dec-2008 21:10:52 (13)

Re: Driveshaft - krazy karl 21-Dec-2008 22:53:13 (2)

Re: Driveshaft - Larry McAfee 22-Dec-2008 10:03:52 (0)

Re: Driveshaft vs 302? - bh/ 21-Dec-2008 23:56:33 (0)

Propshaft = Driveshaft - Fastjeff 21-Dec-2008 22:44:45 (9)

Re: Propshaft = Driveshaft - George Stillwill 22-Dec-2008 04:39:17 (8)

Re: Propshaft = Driveshaft - bh/ 22-Dec-2008 15:27:49 (5)

Re: Propshaft = Driveshaft - George Stillwill 22-Dec-2008 15:45:41 (4)

Re: kilos - bh/ 22-Dec-2008 19:14:15 (3)

Re: kilos - George Stillwill 22-Dec-2008 19:54:24 (2)

Re: kilos+ - bh/ 23-Dec-2008 09:01:01 (1)

Re: kilos+ - George Stillwill 23-Dec-2008 15:39:43 (0)

Not quite... - Greg Mc 22-Dec-2008 09:20:50 (1)

Re: Not quite... - George Stillwill 22-Dec-2008 15:37:39 (0)

Dark Blocks - Phil S. 21-Dec-2008 15:05:53 (1)

Re: Dark Blocks - MikeB 22-Dec-2008 07:15:10 (0)

'60s Collectables - Walt 21-Dec-2008 14:41:07 (11)

Re: '60s Collectables - Sam Cullis 21-Dec-2008 15:48:21 (10)

Re: '60s Collectables - Randy 21-Dec-2008 17:49:45 (9)

Re: '60s Collectables...Engines of interest? - Don Muncie 21-Dec-2008 19:55:54 (8)

Re: '60s Collectables...Engines of interest? - Fastjeff 21-Dec-2008 22:42:40 (7)

Re: '60s Collectables...Engines of interest? - LarryR 22-Dec-2008 05:49:21 (6)

The ultimate word on Merc triples - Fastjeff 22-Dec-2008 06:14:11 (5)

Re: The ultimate word on Merc triples - LarryR 22-Dec-2008 11:40:55 (4)

Re: The ultimate word on Merc triples - George Garland 22-Dec-2008 20:18:15 (2)

Good stuff, George! - Fastjeff 23-Dec-2008 05:10:37 (1)

Re: Good stuff, George! - George Garland 23-Dec-2008 08:26:17 (0)

Re: The ultimate word on Merc triples - Don Muncie 22-Dec-2008 12:12:39 (0)

Items to sell - John 21-Dec-2008 14:31:53 (13)

Re: Items to sell - George Garland 21-Dec-2008 15:55:22 (12)

George, did you source these out.... - John 22-Dec-2008 09:36:26 (1)

Re: George, did you source these out.... - George Garland 23-Dec-2008 12:20:48 (0)

Re: Items to sell - Vald 21-Dec-2008 23:20:07 (1)

Re: Items to sell - George Garland 23-Dec-2008 12:22:06 (0)

Re: Items to sell - PNW Thom 21-Dec-2008 21:39:52 (3)

Re: Items to sell - PNW Thom 22-Dec-2008 16:27:10 (2)

Re: Items to sell - George Garland 23-Dec-2008 12:19:36 (1)

Re: Items to sell - PNW Thom 23-Dec-2008 19:57:18 (0)

Re: Items to sell - Fastjeff 21-Dec-2008 19:05:15 (3)

Re: Items to sell - Conrad 21-Dec-2008 19:48:53 (1)

Re: Items to sell - Fastjeff 21-Dec-2008 22:40:56 (0)

Re: Items to sell - George Garland 21-Dec-2008 19:44:05 (0)

chroming parts - popdude 21-Dec-2008 12:57:36 (3)

Re: chroming parts - George Garland 21-Dec-2008 13:38:35 (1)

Re: chroming parts - popdude 21-Dec-2008 15:25:26 (0)

Re: chroming parts - George Garland 21-Dec-2008 13:25:44 (0)

Cut Outs Question - Fastjeff 21-Dec-2008 11:03:18 (9)

Re: Cut Outs Question - Ed Hatch 21-Dec-2008 13:58:22 (1)

Ed... - Fastjeff 21-Dec-2008 19:02:56 (0)

Re: Cut Outs Question - Ron Thomas 21-Dec-2008 12:45:22 (6)

Re: Cut Outs Question - Sam Cullis 21-Dec-2008 14:08:20 (5)

Re: Cut Outs Question - bh/ 21-Dec-2008 17:48:17 (4)

Tight crankcases - Greg Mc 22-Dec-2008 09:33:17 (1)

Excellent comment! Totally agree.(NT) - Fastjeff 22-Dec-2008 10:24:42 (0)

Case Closed! - Fastjeff 21-Dec-2008 19:08:14 (1)

Re: Case Closed! - George Garland 23-Dec-2008 12:25:25 (0)

Spammers beware, we are gonna get 'cha! - George Garland 21-Dec-2008 08:57:50 (0)

omc rotary - jack 21-Dec-2008 00:35:17 (5)

Re: omc rotary - Sam Cullis 21-Dec-2008 10:52:19 (0)

Not an OMC, but... - Fastjeff 21-Dec-2008 04:01:33 (3)

And with the cowl off...(NT) - Fastjeff 21-Dec-2008 04:03:01 (2)

Re: And with the cowl off...(NT) - bob 21-Dec-2008 10:32:20 (1)

Hey! It's not mine. - Fastjeff 21-Dec-2008 11:06:05 (0)

nice collection of restored mercury motors & race motors 4 sale - Michael 20-Dec-2008 21:57:54 (7)

Re: nice collection of restored mercury motors & race motors 4 sale - John 21-Dec-2008 12:27:40 (6)

Re: nice collection of restored mercury motors & race motors 4 sale - Michael 21-Dec-2008 13:25:34 (5)

Re: nice collection of restored mercury motors & race motors 4 sale - Sam Cullis 21-Dec-2008 14:07:22 (4)

Re: nice collection of restored mercury motors & race motors 4 sale - Michael 21-Dec-2008 14:17:34 (3)

Re: nice collection of restored mercury motors & race motors 4 sale - vald 21-Dec-2008 16:00:05 (2)

Re: what its worth vs what it costs - Sam Cullis 21-Dec-2008 18:14:46 (1)

Re: what its worth vs what it costs - George Garland 23-Dec-2008 12:33:13 (0)

Merc 200 (20hp) lower unit compatibility - John 20-Dec-2008 19:17:56 (2)

Re: Merc 200 (20hp) lower unit compatibility - Don Muncie 20-Dec-2008 20:02:35 (1)

thanks - John 21-Dec-2008 12:18:05 (0)

On Exhaust Dividers - Fastjeff 20-Dec-2008 18:14:47 (11)

Re: On Exhaust Dividers - Don Muncie 20-Dec-2008 19:51:55 (10)

IMPOSSIBLE !! - bobvdinghyracer 20-Dec-2008 23:25:56 (5)

Re: IMPOSSIBLE !! drawing showing degrees (NT) - bobvdinghyracer 20-Dec-2008 23:28:13 (4)

Re: IMPOSSIBLE !!..Forgive my math. - Don Muncie 21-Dec-2008 00:08:26 (3)

Re: IMPOSSIBLE !!.. - Sam Cullis 21-Dec-2008 10:54:30 (2)

Re: IMPOSSIBLE !!.. - Don Muncie 21-Dec-2008 12:17:42 (1)

Re: Detonating a hole in the piston skirt - Sam Cullis 21-Dec-2008 14:09:28 (0)

Re: On Exhaust Dividers - Fastjeff 20-Dec-2008 20:16:37 (3)

Re: On Exhaust Dividers - Frank 20-Dec-2008 20:33:44 (2)

Re: On Exhaust Dividers - Sam Cullis 20-Dec-2008 21:13:29 (1)

Re: On Exhaust Dividers - LarryR 22-Dec-2008 11:48:47 (0)

Spam Chasers - Dick Gorz 19-Dec-2008 21:00:41 (0)

Mr. Adminstrator - J White 19-Dec-2008 17:36:34 (1)

Re: Mr. Adminstrator - Dick Gorz 19-Dec-2008 19:17:41 (0)

We're getting SPAMMED to death lately! - Fastjeff 19-Dec-2008 16:33:01 (4)

Re: We're getting SPAMMED to death lately! - Dick Gorz 19-Dec-2008 19:04:33 (3)

Anything I can do to help, I'd be glad to do!!! Thanks (NT) - bean 19-Dec-2008 21:12:08 (0)

Re: We're getting SPAMMED to death lately! - George Garland 19-Dec-2008 19:30:19 (1)

Re: We're getting SPAMMED to death lately! - Dick Gorz 19-Dec-2008 19:33:05 (0)

Quickie cone nut tool - Michael 19-Dec-2008 12:54:45 (9)

Michael try this... - Tom Brockmeyer 19-Dec-2008 13:44:02 (2)

Re: Michael try this... - Michael 19-Dec-2008 13:47:36 (1)

Re: Michael try this...Tom! - Don Muncie 19-Dec-2008 14:31:27 (0)

Re: Quickie cone nut tool..yauh, I do - Don Muncie 19-Dec-2008 13:25:03 (5)

Re: Quickie cone nut tool..yauh, I do - Michael 19-Dec-2008 13:33:40 (4)

Re: Quickie cone nut tool..yauh, I do - MikeH 19-Dec-2008 16:31:01 (0)

Re: Quickie cone nut tool..It works very well! (nt) - Don Muncie 19-Dec-2008 14:27:59 (2)

Re: Quickie cone nut tool..It works very well! (nt) - JW in Dixie 19-Dec-2008 18:58:56 (0)

Re: Quickie cone nut tool..It works very well! (nt) - Ron Thomas 19-Dec-2008 18:56:03 (0)

Merc 200 (1973) Choke cable assy - Buzz Lindberg 19-Dec-2008 10:45:58 (2)

Re: Merc 200 (1973) Choke cable assy - Fastjeff 19-Dec-2008 11:07:22 (1)

Re: Merc 200 (1973) Choke cable assy - Buzz Lindberg 19-Dec-2008 12:38:32 (0)

Cowl wraps--what kind of metal and polish how-to? - Bill Morel 18-Dec-2008 21:45:33 (2)

Re: Cowl wraps--what kind of metal and polish how-to? - Fastjeff 19-Dec-2008 06:37:56 (0)

Re: Cowl wraps--what kind of metal and polish how-to? - Michael 18-Dec-2008 22:49:59 (0)

Repro lower cowls for the KF7/KG7 - John 18-Dec-2008 17:28:28 (1)

Re: Repro lower cowls for the KF7/KG7 - Gary 18-Dec-2008 23:07:38 (0)

Carb spec - Walt 18-Dec-2008 17:05:05 (2)

Re: Carb spec - Buzz Lindberg 18-Dec-2008 19:03:07 (1)

Any idea what the 'x' stood for? - Walt 18-Dec-2008 19:57:35 (0)

The 40 vs 44 question... - Fastjeff 18-Dec-2008 15:42:01 (14)

Re: The 40 vs 44 question... - Jake B. 19-Dec-2008 11:57:43 (0)

Re: The 40 vs 44 question... - Sam Cullis 18-Dec-2008 16:05:29 (12)

Re: The 40 vs 44 question... - Larry McAfee 19-Dec-2008 08:12:06 (3)

Re: The 40 vs 44 question... - Fastjeff 19-Dec-2008 08:30:48 (2)

Re: The 40 vs 44 question... - Larry McAfee 19-Dec-2008 10:50:57 (1)

Re: The 40 vs 44 question... - Fastjeff 19-Dec-2008 11:08:47 (0)

Re: The 40 vs 44 question...Sam's right on this one! - Don Muncie 18-Dec-2008 16:52:46 (7)

Re: The 40 vs 44 question...Sam's right on this one! - LarryR 19-Dec-2008 13:00:33 (0)

Re: The 40 vs 44 question...I need to correct meself! - Don Muncie 18-Dec-2008 19:18:26 (5)

Re: The 40 vs 44 question...I need to correct meself!..again! - Don Muncie 18-Dec-2008 19:22:47 (4)

Re: The 40 vs 44 question...I need to correct meself!..again! - Sam Cullis 18-Dec-2008 21:47:18 (3)

Re: The 40 vs 44 question...I need to correct meself!..again! - Frank 18-Dec-2008 22:30:52 (2)

Re: The 40 vs 44 question...I need to correct meself!..again! - Sam Cullis 19-Dec-2008 06:13:54 (0)

Re: The 40 vs 44 question...I need to correct meself!..again! - George Stillwill 19-Dec-2008 05:00:51 (0)

Replacement spring for KE4 Recoil - Richard G 17-Dec-2008 19:23:17 (5)

Re: Replacement spring for KE4 Recoil - Ken B. 20-Dec-2008 22:05:44 (0)

Re: Replacement spring for KE4 Recoil - dave bernard 17-Dec-2008 19:35:46 (2)

Re: Replacement spring for KE4 Recoil - Louis 18-Dec-2008 12:44:34 (1)

Re: Replacement spring for KE4 Recoil - Fastjeff 18-Dec-2008 15:11:39 (0)

Re: Replacement spring for KE4 Recoil(NT) - dave bernard 17-Dec-2008 19:34:52 (0)

Glastron/1500 Merc - Buzz Lindberg 17-Dec-2008 15:29:27 (7)

Re: Glastron/1500 Merc - Sam Cullis 17-Dec-2008 16:17:13 (6)

Re: Glastron/1500 Merc/ebay - bh/ 19-Dec-2008 17:30:08 (1)

Re: Glastron/1500 Merc/ebay - Fastjeff 20-Dec-2008 06:32:08 (0)

Re: Glastron/1500 Merc - bh/ 17-Dec-2008 19:35:48 (3)

Re: Glastron/1500 Merc - Sam Cullis 17-Dec-2008 19:55:12 (2)

Re: Glastron/1500 Merc - LarryR 18-Dec-2008 15:26:55 (1)

Re: Merc dividers - Sam Cullis 19-Dec-2008 20:13:39 (0)

Hull design changes - Fastjeff 17-Dec-2008 12:41:32 (2)

Re: Hull design changes - Conrad 17-Dec-2008 14:07:21 (1)

Re: Hull design changes - Fastjeff 17-Dec-2008 15:52:12 (0)

It Runs! - Fastjeff 17-Dec-2008 09:16:19 (12)

Re: It Runs! - GregMc 17-Dec-2008 19:28:57 (6)

Greg - Fastjeff 18-Dec-2008 06:57:04 (5)

Re: Greg - Greg Mc 18-Dec-2008 09:49:38 (4)

Cool! Thanks. - Fastjeff 18-Dec-2008 10:56:21 (3)

Re: Cool! Thanks. - Don Muncie 18-Dec-2008 11:52:06 (2)

Merc 200 - Fastjeff 18-Dec-2008 12:17:42 (1)

Re: Merc 200 - Don Muncie 18-Dec-2008 14:48:19 (0)

Re: It Runs! - George Garland 17-Dec-2008 09:32:30 (4)

Re: It Runs! - LarryR 17-Dec-2008 11:26:56 (3)

Reply to Larry's questions - Fastjeff 17-Dec-2008 11:39:42 (2)

Re:I may have what you need - Craig Waters 17-Dec-2008 13:25:35 (1)

Yes! Please. - Fastjeff 17-Dec-2008 15:50:43 (0)

Porting Specs for the 25SS vs Merc 200 - John 17-Dec-2008 09:14:41 (8)

Re: Porting Specs for the 25SS vs Merc 200 - Jake B. 17-Dec-2008 13:51:38 (0)

Re: Porting Specs for the 25SS vs Merc 200 - LarryR 17-Dec-2008 11:29:00 (0)

Re: Porting Specs for the 25SS vs Merc 200 - George Stillwill 17-Dec-2008 10:42:21 (5)

Re: Porting Specs for the 25SS vs Merc 200 - Ron Thomas 17-Dec-2008 17:09:58 (4)

Re: Porting Specs for the 25SS vs Merc 200 - Fastjeff 17-Dec-2008 19:00:28 (3)

Re: Porting Specs for the 25SS vs Merc 200 - Ronald Thomas 17-Dec-2008 23:39:03 (2)

Thanks, Ronald.(NT) - Fastjeff 18-Dec-2008 06:58:26 (1)

Re: Thanks, Ronald.(NT) - RonM 18-Dec-2008 17:38:48 (0)

1979/80 Merc 200 (20hp) pic needed - John 17-Dec-2008 08:57:55 (1)

Re: 1979/80 Merc 200 (20hp) pic needed - George Garland 17-Dec-2008 09:39:39 (0)

Big four/six LU question - Rodney 16-Dec-2008 18:02:01 (1)

Re: Big four/six LU question - Larry McAfee 16-Dec-2008 21:18:47 (0)

Merc Powerhead to L/U studs - Buzz Lindberg 16-Dec-2008 11:05:22 (3)

Re: Merc Powerhead to L/U studs - Fastjeff 16-Dec-2008 14:33:29 (2)

Re: Merc Powerhead to L/U studs - Buzz Lindberg 16-Dec-2008 16:22:12 (1)

Re: Merc Powerhead to L/U studs - Fastjeff 16-Dec-2008 21:01:28 (0)

Photos of my Disaster - Fastjeff 16-Dec-2008 10:02:27 (26)

Re: Photos of my Disaster - bob 16-Dec-2008 19:21:40 (1)

Re: Photos of my Disaster--Details - Fastjeff 16-Dec-2008 21:17:16 (0)

Re: Photos of my Disaster - George Stillwill 16-Dec-2008 14:21:17 (1)

Re: Photos of my Disaster - Fastjeff 16-Dec-2008 14:35:38 (0)

Re: Photos of my Disaster - Conrad 16-Dec-2008 10:34:31 (1)

One has to know when to quit! - Fastjeff 16-Dec-2008 10:39:53 (0)

Re: Photos of my Disaster - Fastjeff 16-Dec-2008 10:05:01 (19)

Carbs - Greg Mc 17-Dec-2008 07:32:07 (1)

Re: Carbs - Fastjeff 17-Dec-2008 09:20:46 (0)

Re: Photos of my Disaster - Conrad 16-Dec-2008 11:47:12 (16)

Re: Photos of my Disaster - Fastjeff 16-Dec-2008 14:38:31 (15)

Re: Photos of my Disaster - jack 16-Dec-2008 14:46:15 (14)

Re: Photos of my Disaster...George Stillwill is RIGHT!!! - Don Muncie 16-Dec-2008 15:00:30 (13)

Re: Photos of my Disaster...George Stillwill is RIGHT!!! - Sam Cullis 16-Dec-2008 16:56:27 (12)

Thanks, Sam - Fastjeff 16-Dec-2008 17:08:37 (11)

Re: Thanks, Sam...OK, I think I'm still right. - Don Muncie 16-Dec-2008 17:35:25 (10)

Re: Thanks, Sam...OK, I think I'm still right. - Sam Cullis 16-Dec-2008 18:02:42 (9)

Re: Thanks, Sam...OK, I think I'm still right. - Ed Hatch 16-Dec-2008 18:58:12 (3)

Tim Kurcz's 444 - Larry McAfee 17-Dec-2008 08:56:13 (1)

Re: Tim Kurcz's 444 - Sam Cullis 17-Dec-2008 16:23:09 (0)

Reaqlly neat photo! - Fastjeff 16-Dec-2008 21:05:36 (0)

Re: Thanks, Sam...OK, I think I'm still right., I'm with Don on this - Larry McAfee 16-Dec-2008 18:34:08 (4)

Re: Thanks, Sam...OK, I think I'm still right., I'm with Don on this - George Stillwill 16-Dec-2008 19:30:50 (3)

better yet show an tell - bobvdinghyracer 16-Dec-2008 20:29:51 (2)

Re: better yet show an tell - George Stillwill 17-Dec-2008 05:49:23 (1)

Re: better yet show an tell - Fastjeff 17-Dec-2008 05:55:16 (0)

Conrad... - Fastjeff 16-Dec-2008 06:08:04 (2)

Re: Conrad... - Conrad 16-Dec-2008 10:28:55 (0)

Re: Conrad... - LarryR 16-Dec-2008 08:47:57 (0)

Lower bearing failrure - Walt 15-Dec-2008 21:13:48 (5)

Re: Lower bearing failrure - proffessor 15-Dec-2008 22:03:05 (0)

Octane max - Jim Savage 15-Dec-2008 21:50:27 (0)

Re: Lower bearing failrure - bobvdinghyracer 15-Dec-2008 21:22:38 (2)

Re: Lower bearing failrure - George Stillwill 16-Dec-2008 04:56:45 (0)

also.. - bobvdinghyracer 15-Dec-2008 21:25:47 (0)

20 hp mer - Charles D 15-Dec-2008 20:49:12 (0)

Dyna-Float rubber update - Mark 10 - DaytonaJohn 15-Dec-2008 20:28:50 (2)

Re: Dyna-Float rubber update - Mark 10 - LarryR 16-Dec-2008 05:33:26 (1)

Re: Dyna-Float rubber update - Mark 10 - dave bernard 16-Dec-2008 10:19:31 (0)

KE-7 - John Bennig 15-Dec-2008 20:00:04 (3)

Re: KE-7 - Ronald 15-Dec-2008 21:27:47 (0)

Re: KE-7 - John 15-Dec-2008 21:08:51 (0)

Re: KE-7 - J White 15-Dec-2008 20:56:20 (0)

Merc 20H vs. Champion 6MMHR - Buzz Lindberg 15-Dec-2008 19:01:48 (4)

Re: Merc 20H vs. Champion 6MMHR - Ronald 15-Dec-2008 21:47:27 (3)

Re: Merc 20H vs. Champion 6MMHR - George Stillwill 16-Dec-2008 05:10:08 (2)

Re: Merc 20H vs. Champion 6MMHR - Sam Cullis 16-Dec-2008 06:01:12 (1)

Re: Merc 20H vs. Champion 6MMHR - Buzz Lindberg 16-Dec-2008 07:01:36 (0)

mark6 - Will Doherty 15-Dec-2008 18:31:04 (1)

Re: mark6 - dave bernard 15-Dec-2008 18:59:42 (0)

My not so "Super" 40 - Fastjeff 15-Dec-2008 10:18:51 (12)

Re: My not so "Super" 40 - Frank 15-Dec-2008 12:39:58 (11)

Re: My not so "Super" 40 , reminds me of my frankenmotor 25ss - Shawn 15-Dec-2008 13:42:42 (10)

Seen both of those. Thanks.(NT) - Fastjeff 15-Dec-2008 14:04:14 (9)

Re: opinion - Sam Cullis 15-Dec-2008 17:14:19 (8)

Thanks, Sam. - Fastjeff 15-Dec-2008 17:32:58 (7)

Re: Thanks, Sam. - Kingdve 15-Dec-2008 18:02:05 (6)

Re: carbs & cylinders - Sam Cullis 15-Dec-2008 21:43:13 (5)

Look again Sam... He's got external reeds and gutted the reedblock. - Tom Brockmeyer 15-Dec-2008 22:33:49 (4)

Re: Look again Sam... He's got external reeds and gutted the... - George Stillwill 16-Dec-2008 04:51:58 (2)

Clarification - Fastjeff 16-Dec-2008 05:45:21 (1)

Re: Clarification [OK gotcha Jeff. Nice work anyway. Keep trying](NT) - Tom Brockmeyer 16-Dec-2008 10:40:50 (0)

Re: Look again Sam... He's got external reeds and gutted the... - proffessor 16-Dec-2008 03:45:00 (0)

Lower unit seals - keystone 14-Dec-2008 21:52:33 (9)

Re: Lower unit seals - Fastjeff 15-Dec-2008 05:53:31 (8)

Re: Lower unit seals - proffessor 15-Dec-2008 06:41:11 (7)

Re: Lower unit seals - Don Muncie 15-Dec-2008 09:30:40 (6)

Re: Lower unit seals - Frank 15-Dec-2008 15:13:08 (3)

I'm with you - Fastjeff 15-Dec-2008 15:47:38 (2)

Re: I'm with you - LarryR 15-Dec-2008 16:05:05 (1)

Re: I'm with you - George Stillwill 15-Dec-2008 17:20:17 (0)

Re: Lower unit seals - LarryR 15-Dec-2008 14:41:39 (1)

Re: Lower unit seals - keytone 15-Dec-2008 21:16:33 (0)

Gas and boat problems article in today's paper - DaytonaJohn 14-Dec-2008 15:42:53 (3)

Re: Gas and boat problems article in today's paper - George Stillwill 14-Dec-2008 16:20:23 (2)

Re: Gas and boat problems article in today's paper - Shawn 14-Dec-2008 19:46:53 (1)

Re: Gas and boat problems article in today's paper - LarryR 15-Dec-2008 07:28:23 (0)

60J - jack 14-Dec-2008 15:07:35 (3)

Re: 60J - Ronald 14-Dec-2008 15:36:18 (0)

Re: 60J - Sam Cullis 14-Dec-2008 15:28:09 (1)

Re: 60J if you can get it ... - Shawn 14-Dec-2008 20:29:18 (0)

Test tank. - J White 14-Dec-2008 14:35:37 (10)

Re: Test tank. - popdude 15-Dec-2008 07:52:34 (1)

P. S. - popdude 15-Dec-2008 08:09:37 (0)

Stock Tank... - CC 15-Dec-2008 06:40:47 (0)

Re: Test tank. - Speedliner 14-Dec-2008 14:41:23 (6)

Re: Test tank. - J White 14-Dec-2008 15:20:03 (5)

Some advice on your test tank... - Richard White 16-Dec-2008 11:54:41 (0)

Re: Test tank. - Speedliner 14-Dec-2008 16:10:31 (3)

Re: Test tank. - J White 14-Dec-2008 16:30:03 (2)

Re: Test tank. - LarryR 15-Dec-2008 16:07:53 (0)

PM sent(NT) - Speedliner 14-Dec-2008 17:00:31 (0)

Setting up the Bendix Skintillas - Walt 14-Dec-2008 13:12:20 (1)

Re: Setting up the Bendix Skintillas - George Stillwill 14-Dec-2008 15:05:15 (0)

Piston Question - J White 13-Dec-2008 21:18:22 (9)

Re: Piston Question - George Garland 14-Dec-2008 14:46:58 (0)

Re: Piston Question - vald 14-Dec-2008 10:31:46 (0)

Re: Piston Question - Larry McAfee 14-Dec-2008 09:18:50 (1)

I'm with you, Larry - Fastjeff 14-Dec-2008 09:44:52 (0)

Re: Piston Question - Sam Cullis 13-Dec-2008 23:01:21 (4)

Re: Piston Question - LarryR 15-Dec-2008 07:30:47 (0)

Re: Piston Question - J White 14-Dec-2008 14:32:20 (2)

Re: Piston Question - LarryR 15-Dec-2008 14:47:02 (0)

Re: Piston Question - George Stillwill 14-Dec-2008 15:11:40 (0)

Anyone ever done this.... - John 13-Dec-2008 16:56:38 (2)

Re: Anyone ever done this.... - George Stillwill 13-Dec-2008 17:38:11 (1)

Re: Anyone ever done this.... - krazy karl 21-Dec-2008 11:43:57 (0)

Magneto replacement on Merc 500 - PNW Thom 13-Dec-2008 12:03:54 (5)

Don't do it..... Don Muncie we need ya! - John 13-Dec-2008 14:21:51 (3)

Re: Don't do it..... Don Muncie we need ya!..one more time - Don Muncie 13-Dec-2008 18:13:47 (2)

cant wait for E-20(NT) - jack 14-Dec-2008 13:30:57 (0)

Re: Don't do it..... Don Muncie we need ya!..one more time - Sam Cullis 13-Dec-2008 23:00:00 (0)

Re: Magneto replacement on Merc 500 - dave bernard 13-Dec-2008 13:07:55 (0)

Bob's Emblems & Decals - Dick Gorz 13-Dec-2008 11:59:38 (7)

Re: Bob's Emblems & Decals - Jim Sgrig 14-Dec-2008 07:58:05 (4)

Re: Bob's Emblems & Decals - Dick Gorz 14-Dec-2008 11:40:27 (3)

Re: Bob's Emblems & Decals - Jim Sgrig 14-Dec-2008 11:44:09 (2)

Re: Bob's Emblems & Decals - Dick Gorz 14-Dec-2008 12:01:52 (1)

Re: Bob's Emblems & Decals - JS 15-Dec-2008 07:56:49 (0)

Re: Bob's Emblems & Decals - George Garland 13-Dec-2008 14:11:44 (1)

Re: Bob's Emblems & Decals - George Garland 13-Dec-2008 14:13:46 (0)

Merc Model Years Chart - Fastjeff 13-Dec-2008 05:49:37 (1)

Re: Merc Model Years Chart - LarryR 16-Dec-2008 05:40:43 (0)

Boat Picture - John Chapin 12-Dec-2008 16:23:59 (8)

Re: Boat Picture - Ronald 12-Dec-2008 17:48:57 (7)

Re: Boat Picture - Fastjeff 12-Dec-2008 18:03:21 (6)

Re: Boat Picture - Ronald 12-Dec-2008 18:08:28 (5)

Re: Boat Picture - John Chapin 13-Dec-2008 15:02:48 (4)

Re: Boat Picture - Syd 13-Dec-2008 16:59:18 (0)

Re: Boat Picture - Ronald 13-Dec-2008 16:54:32 (2)

Re: Boat Picture - greg 13-Dec-2008 20:07:15 (1)

Re: Boat Picture - John Chapin 14-Dec-2008 06:09:50 (0)

Anyone ever had dealings with these folks? - Walt 12-Dec-2008 10:05:37 (0)

'80s Merc 25hp - Walt 12-Dec-2008 09:54:15 (17)

Re: '80s Merc 25hp - Tom Mitchell 12-Dec-2008 21:07:58 (0)

Re: '80s Merc 25hp - Craig Waters 12-Dec-2008 15:54:18 (0)

Re: '80s Merc 25hp - Danny Nagasaki 12-Dec-2008 15:25:33 (0)

Re: '80s Merc 25hp - Don Muncie 12-Dec-2008 12:03:56 (13)

Re: '80s Merc 25hp - Walt 12-Dec-2008 14:20:50 (12)

Re: '80s Merc 25hp - Don Muncie 12-Dec-2008 14:47:37 (11)

Re: '80s Merc 25hp - bobvdinghyracer 12-Dec-2008 15:44:02 (10)

Re: '80s Merc 25hp - bobvdinghyracer 12-Dec-2008 15:44:55 (9)

Re: '80s Merc 25hp - Fastjeff 12-Dec-2008 15:48:47 (8)

Re: '80s Merc 25hp - George Stillwill 12-Dec-2008 18:30:49 (3)

Thanks, George. - Fastjeff 13-Dec-2008 04:08:08 (2)

Re: Thanks, George. - George Stillwill 13-Dec-2008 05:54:19 (1)

Re: Thanks again, George. - Fastjeff 13-Dec-2008 10:14:15 (0)

o fa ! - bobvdinghyracer 12-Dec-2008 16:19:41 (3)

wow ... - bobvdinghyracer 12-Dec-2008 16:22:46 (2)

Re: wow ... - Michael 12-Dec-2008 20:46:51 (1)

senior moment...so sorry or .... - bobvdinghyracer 12-Dec-2008 21:37:38 (0)

2 merc 400,s - greg 11-Dec-2008 21:01:44 (8)

Re: 2 merc 400,s - Mike Fogarty 15-Dec-2008 08:21:25 (1)

Re: 2 merc 400,s - greg 15-Dec-2008 20:26:57 (0)

Re: 2 merc 400,s - Craig Waters 12-Dec-2008 15:47:52 (5)

Re: 2 merc 400,s - greg 12-Dec-2008 16:46:15 (4)

Re: 2 merc 400,s - Craig Waters 13-Dec-2008 09:05:59 (3)

Re: 2 merc 400,s - greg 13-Dec-2008 09:55:58 (2)

Re: 2 merc 400,s - Craig Waters 14-Dec-2008 02:32:08 (0)

Re: 2 merc 400,s - JW 13-Dec-2008 15:21:22 (0)

Source for carb parts - Walt 11-Dec-2008 19:49:35 (4)

Re: Source for carb parts - Frank 11-Dec-2008 22:05:59 (0)

Re: Source for carb parts - JW 11-Dec-2008 21:56:49 (2)

Re: Source for carb parts - J White 12-Dec-2008 20:10:07 (1)

Re: Source for carb parts - JW 13-Dec-2008 15:23:30 (0)

On that dopey flamer... - Fastjeff 11-Dec-2008 06:11:48 (5)

Re: too serious !!! - bobvdinghyracer 11-Dec-2008 16:53:04 (4)

Re: too serious !!! - Don Muncie 11-Dec-2008 17:58:11 (3)

Re: too serious !!!- I just had to aplogize to my son. - Bob G 11-Dec-2008 20:03:15 (2)

Re: too serious !!!-dude go away - jack 11-Dec-2008 21:42:10 (1)

Re: too serious !!!-dude go away ....don't feed his sickness - George Garland 11-Dec-2008 21:50:54 (0)

Mk7/KE7 carb swap - John 10-Dec-2008 19:31:43 (1)

Re: Mk7/KE7 carb swap - Ronald 11-Dec-2008 01:07:33 (0)

Maker points ignition - bob 10-Dec-2008 18:55:27 (5)

Re: Maker points ignition - jack 10-Dec-2008 19:26:40 (4)

Re: Maker points ignition - Ron Thomas 10-Dec-2008 20:20:22 (3)

Re: Maker points ignition.....good God almighty - George Garland 10-Dec-2008 22:10:26 (0)

Re: Maker points ignition - Don Muncie 10-Dec-2008 21:43:44 (1)

Re: Maker points ignition - Ron Thomas 11-Dec-2008 09:45:24 (0)

Porject Mercury - Mark 10 Help! HELP!!!! - DaytonaJohn 10-Dec-2008 17:56:32 (2)

Re: Porject Mercury - Mark 10 Help! HELP!!!! - Don Muncie 10-Dec-2008 20:06:17 (1)

Re: Porject Mercury - Mark 10 Help! HELP!!!! - Craig Waters 10-Dec-2008 21:20:50 (0)

650 on e-bay...could somebody advise me... - CC 09-Dec-2008 22:52:35 (16)

Re: 650 on e-bay...could somebody advise me... - greg 10-Dec-2008 20:02:06 (2)

Thanks... - CC 11-Dec-2008 05:04:23 (0)

Re: 650 on e-bay...could somebody advise me... - Don Muncie 10-Dec-2008 20:12:08 (0)

Re: 650 on e-bay...could somebody advise me... - dave bernard 10-Dec-2008 07:00:48 (0)

Re: 650 on e-bay...could somebody advise me...editorial. - Don Muncie 10-Dec-2008 00:26:00 (10)

Re: 650 - Thanks Don... - CC 10-Dec-2008 06:27:36 (1)

Re: 650 - Thanks Don... - George Garland 10-Dec-2008 17:12:41 (0)

Re: 650 on e-bay...could somebody advise me...editorial. - jerry lee lewis 10-Dec-2008 04:01:31 (7)

Re: 650 on e-bay...could somebody advise me...editorial. - JS 10-Dec-2008 10:46:44 (6)

Re: 650 on e-bay...This could apply here. - Stu 10-Dec-2008 11:25:26 (5)

Re: 650 on e-bay...This could apply here. - Michael 10-Dec-2008 12:14:56 (4)

Re: 650 on e-bay...This could apply here. - Don Muncie 10-Dec-2008 13:36:36 (3)

Re: 650 on e-bay...This could apply here. - LarryR 10-Dec-2008 14:30:19 (2)

Re: 650 on e-bay...used to have one - jack 10-Dec-2008 15:54:41 (1)

Re: 650 on e-bay...used to have one - LarryR 10-Dec-2008 17:13:27 (0)

Re: 650 on e-bay...could somebody advise me... - Michael 09-Dec-2008 23:49:19 (0)

Thanks Jeff - George Garland 09-Dec-2008 17:02:04 (1)

Yes it was! Thank YOU(NT) - Fastjeff 09-Dec-2008 18:27:08 (0)

Anyone got an old distributor laying about? - Fastjeff 09-Dec-2008 13:32:29 (2)

Re: Anyone got an old distributor laying about? - Don Muncie 09-Dec-2008 14:55:57 (1)

Great! - Fastjeff 09-Dec-2008 15:41:41 (0)

lubriplate substitutie - frank lee 09-Dec-2008 13:26:21 (1)

Re: lubriplate substitutie - LarryR 09-Dec-2008 18:49:10 (0)

kg7 hurricane cruiser - jim 08-Dec-2008 21:09:10 (10)

Re: kg7 hurricane cruiser "JUST A THOUGHT" - Craig Waters 09-Dec-2008 16:04:19 (0)

Re: kg7 hurricane cruiser - J White 09-Dec-2008 00:13:47 (8)

Re: kg7 hurricane "cruiser" ? - JW 09-Dec-2008 10:00:13 (7)

Re: kg7 hurricane "cruiser" ? - Robert Greve 09-Dec-2008 14:47:55 (6)

Re: kg7 hurricane "cruiser" ? - Daniel G 09-Dec-2008 17:18:05 (5)

Re: kg7 hurricane "cruiser" ? - Daniel's Dad 10-Dec-2008 11:52:27 (0)

Re: kg7 hurricane "cruiser" ? - George Stillwill 09-Dec-2008 18:39:40 (3)

Re: kg7 hurricane "cruiser" ? - Robert Greve 09-Dec-2008 21:36:02 (2)

Re: kg7 hurricane "cruiser" ? - bobvdinghyracer 10-Dec-2008 00:00:45 (1)

Re: kg7 hurricane "cruiser" ? - Frank 10-Dec-2008 20:55:59 (0)

115 L6 water leak - LarryR 08-Dec-2008 17:29:53 (3)

Re: 115 L6 water leak - Jeff_G 09-Dec-2008 09:13:13 (0)

Re: 115 L6 water leak - Fastjeff 08-Dec-2008 20:49:47 (0)

Re: 115 L6 water leak try 2 - LarryR 08-Dec-2008 17:35:16 (0)

Carb Quiz #2 - LarryR 08-Dec-2008 17:06:38 (5)

Re: Carb Quiz #2 - Ron Thomas 09-Dec-2008 13:12:06 (2)

Re: Carb Quiz #2. putting all seriousness asside? - Don Muncie 09-Dec-2008 13:23:19 (1)

Re: Carb Quiz #2. putting all seriousness asside? - Ron Thomas 09-Dec-2008 14:12:48 (0)

Re: Carb Quiz #2 - Don Muncie 08-Dec-2008 17:58:22 (1)

Re: Carb Quiz #2 - LarryR 09-Dec-2008 18:55:10 (0)

ALUMINUM REPAIR - Steve S 08-Dec-2008 08:36:00 (8)

THANKS GUYS! (nm)(NT) - STEVE S 09-Dec-2008 19:57:35 (0)

aluma weld ...WELL ..... - bobvdinghyracer 09-Dec-2008 17:47:05 (0)

Re: ALUMINUM REPAIR - Rick 08-Dec-2008 10:03:10 (5)

Re: ALUMINUM REPAIR - proffessor 10-Dec-2008 07:10:38 (4)

Re: ALUMINUM REPAIR - bob 10-Dec-2008 22:06:54 (3)

Re: ALUMINUM REPAIR - proffessor 10-Dec-2008 22:18:57 (2)

Re: cleaning ... - bobvdinghyracer 11-Dec-2008 16:47:05 (1)

Re: cleaning ... - proffessor 12-Dec-2008 08:30:02 (0)

Carb Quiz Time! - Fastjeff 07-Dec-2008 20:33:28 (22)

Re: Carb Quiz Time! - George Garland 08-Dec-2008 16:54:20 (0)

Re: Carb Quiz Time! - Ed Hatch 07-Dec-2008 21:04:28 (20)

Re: Carb Quiz Time! - Don Muncie 08-Dec-2008 00:04:06 (19)

Re: Carb Quiz Time! - LarryR 08-Dec-2008 05:50:48 (18)

Re: Carb Quiz Time! - Don Muncie 08-Dec-2008 09:32:42 (0)

Re: Carb Quiz --the Answer - Fastjeff 08-Dec-2008 09:02:44 (3)

Re: Carb Quiz --the Answer, well, maybe? - Don Muncie 08-Dec-2008 09:41:05 (2)

Re: Carb Quiz --the Answer, well, maybe? KC16A cut up!! - Larry McAfee 09-Dec-2008 07:53:25 (1)

Re: Carb Quiz --the Answer, well, maybe? KC16A cut up!! - Don Muncie 09-Dec-2008 08:17:02 (0)

Re: Carb Quiz Time! - Fastjeff 08-Dec-2008 09:00:39 (12)

Re: Carb Quiz Time! - LarryR 08-Dec-2008 11:17:27 (11)

It flows back to front! - Fastjeff 08-Dec-2008 11:26:09 (10)

Re: It flows back to front! - Ed Hatch 08-Dec-2008 14:29:42 (9)

Re: It flows back to front! - Fastjeff 08-Dec-2008 15:19:10 (8)

Re: It flows..BRAIN FART!! BOY IS DEY STINKY!!!!!!!! - Don Muncie 08-Dec-2008 16:42:32 (7)

Welcome to the clib! - Fastjeff 08-Dec-2008 20:47:57 (6)

Re: clib! - bobvdinghyracer 08-Dec-2008 22:19:30 (0)

Re: Welcome to the clib! - Michael 08-Dec-2008 21:00:04 (4)

Re: Welcome to the clib!..This is the word for club, by.... - Don Muncie 09-Dec-2008 00:18:00 (3)

One little typo and look what I get! - Fastjeff 09-Dec-2008 05:42:38 (2)

Re: One little typo and look what I get! - George Stillwill 09-Dec-2008 07:12:23 (1)

Re: One little typo and look what I get! - Fastjeff 09-Dec-2008 11:06:34 (0)

Tech Tip = Another application for a KG7 Impeller .... - John 07-Dec-2008 19:33:59 (0)

Airguide Tachometer P-6487 - Bob Huff 07-Dec-2008 19:08:55 (2)

Re: Airguide Tachometer P-6487 - LarryR 08-Dec-2008 14:22:27 (1)

Re: Airguide Tachometer P-6487 - Bob Huff 09-Dec-2008 07:39:28 (0)

Mercury medallions available - Peter McDowell 07-Dec-2008 17:02:57 (0)

hard to start 8hp - larry hedder jacobs 07-Dec-2008 15:34:19 (1)

Re: hard to start 8hp - George Stillwill 07-Dec-2008 16:29:20 (0)

H to Q adapter - MikeH 07-Dec-2008 15:33:05 (1)

Re: H to Q adapter - Daniel G 07-Dec-2008 16:07:18 (0)

Merc 850 rough turning - Shawn 07-Dec-2008 15:20:22 (3)

Re: Merc 850 rough turning - dave bernard 07-Dec-2008 15:36:05 (2)

Re: Merc 850 rough turning..right down my alley! - Don Muncie 07-Dec-2008 16:34:10 (1)

Re: Merc 850 rough turning..right down my alley! - LarryR 08-Dec-2008 05:56:40 (0)

Oh where oh where? - John 06-Dec-2008 16:04:41 (3)

Re: Oh where oh where? - jack 06-Dec-2008 16:10:00 (2)

Re: Oh where oh where?..you really truly need to find it! - Don Muncie 06-Dec-2008 17:10:36 (1)

Re: Oh where oh where?..you really truly need to find it! - George Garland 07-Dec-2008 11:53:30 (0)

Recoil starter trick - Fastjeff 06-Dec-2008 12:02:27 (4)

Re: Recoil starter trick - Greg Mc 10-Dec-2008 15:11:05 (1)

Re: Recoil starter trick - Fastjeff 10-Dec-2008 17:11:23 (0)

Re: Recoil starter trick - John 07-Dec-2008 08:58:46 (1)

Re: Recoil starter trick - LarryR 08-Dec-2008 05:58:23 (0)

check out this boat - Larry McAfee 06-Dec-2008 08:44:19 (6)

Re: check out this boat - Buzz Lindberg 07-Dec-2008 13:31:00 (0)

Re: check out this boat - Buzz Lindberg 06-Dec-2008 15:31:12 (0)

Re: check out this boat - LarryR 06-Dec-2008 09:24:44 (3)

Re: check out this boat - proffessor 06-Dec-2008 16:09:11 (2)

Re: check out this boat - George Stillwill 07-Dec-2008 19:22:35 (1)

Re: check out this boat - LarryR 08-Dec-2008 06:03:43 (0)

fuel tanks - MikeH 06-Dec-2008 08:43:45 (1)

Re: fuel tanks - Richard G 07-Dec-2008 19:37:33 (0)

KG7 - MikeH 05-Dec-2008 16:13:38 (3)

Re: KG7 - John 06-Dec-2008 16:09:02 (0)

Re: KG7 - bobvdinghyracer 05-Dec-2008 17:28:22 (0)

Re: KG7 - Ronald 05-Dec-2008 17:10:59 (0)

Water Pump Cartridges - David Van Weele 04-Dec-2008 20:11:26 (2)

Re: Water Pump Cartridges - alanaker 05-Dec-2008 06:06:20 (1)

Re: Water Pump Cartridges - David Van Weele 05-Dec-2008 11:23:00 (0)

Michigan Wheel Prop - Speedliner 04-Dec-2008 19:18:20 (2)

Re: Michigan Wheel Prop - Joe Poole, Jr. 05-Dec-2008 08:59:38 (1)

Re: Michigan Wheel Prop - Speedliner 05-Dec-2008 14:46:37 (0)

20H throttle return spring clip - Bob Huff 04-Dec-2008 18:24:42 (7)

Re: 20H throttle return spring clip - vald 05-Dec-2008 04:34:49 (0)

Re: 20H throttle return spring clip - David Van Weele 04-Dec-2008 19:08:48 (5)

Re: 20H throttle return spring clip - Bob Huff 05-Dec-2008 14:02:46 (4)

Re: 20H throttle return spring clip - George Stillwill 05-Dec-2008 15:05:47 (0)

Re: 20H throttle return spring clip - Michael 05-Dec-2008 14:48:43 (2)

Re: 20H throttle return spring clip - Bob Huff 05-Dec-2008 16:55:18 (1)

Re: 20H throttle return spring clip - David Van Weele 18-Dec-2008 19:14:11 (0)

fuel line size - Craig Waters 04-Dec-2008 16:32:02 (5)

Re: fuel line size - George Stillwill 05-Dec-2008 05:35:53 (1)

Re: fuel line size - Fastjeff 05-Dec-2008 05:41:45 (0)

Re: fuel line size - proffessor 05-Dec-2008 04:46:53 (0)

Re: fuel line size - LarryR 04-Dec-2008 17:11:02 (1)

Re: fuel line size - Shawn 05-Dec-2008 05:41:03 (0)

Mark 28A midsection and lower - Frank 04-Dec-2008 15:30:55 (0)

Re: 25XS powerhead to H tower adapter - Ron Thomas 04-Dec-2008 19:58:57 (0)

It might have a casting no. 12640 somewhere if it's 25XS - Tom Brockmeyer 04-Dec-2008 14:37:40 (0)

Re: 25XS or 35? - Greg Mc 09-Dec-2008 10:13:51 (0)

Re: 25XS or 35? - walts 07-Dec-2008 20:49:33 (1)

Re: 25XS or 35? - Don Muncie 08-Dec-2008 00:05:07 (0)

Re: Why wouldn't this work? - LarryR 04-Dec-2008 17:24:59 (1)

Re: Why wouldn't this work? - Really bad idea - LarryR 04-Dec-2008 18:45:08 (0)

Re: Scored piston question. - J White 04-Dec-2008 15:15:16 (1)

Re: Scored piston question. - Kirk S, 11-Dec-2008 10:30:49 (0)

Re: Mark30 flywheel & starter - Don Muncie 04-Dec-2008 13:22:16 (2)

Re: Mark30 flywheel & starter - Fastjeff 04-Dec-2008 14:15:25 (1)

Re: Mark30 flywheel & starter - Don Muncie 04-Dec-2008 15:32:31 (0)

Re: What coupler device... - George Stillwill 04-Dec-2008 15:56:18 (1)

Re: What coupler device... - Larry McAfee 04-Dec-2008 16:50:27 (0)

Re: Mark30 flywheel & starter - PNW Thom 06-Dec-2008 17:42:32 (0)

Re: You really hate those triples, Sam!(NT) - George Garland 04-Dec-2008 21:51:03 (0)

Re: school project involving antique outboards - Ed Hatch 05-Dec-2008 12:57:37 (0)

Re: Re:AOMCI & Racing ... its been brought up before - John Schubert 04-Dec-2008 15:49:13 (0)

Re: "Classic" racing division within APBA...Sam brings up.. - Al Lang 17-Dec-2008 14:31:50 (0)

Re: "Classic" racing division within APBA...Sam brings up.. - Daniel G 08-Dec-2008 16:01:53 (0)

Re: 1966 Merc 1000...Serial Number???????????? - Frank 04-Dec-2008 16:30:03 (9)

Re: 1966 Merc 1000...Serial Number???????????? - LarryR 05-Dec-2008 12:08:59 (0)

Re: 1966 Merc 1000...Serial Number?..1965! - Don Muncie 04-Dec-2008 17:31:53 (7)

Re: 1966 Merc 1000...Serial Number?..1965! - Frank 05-Dec-2008 19:51:12 (4)

Re: 1966 Merc 1000...Serial Number?..1965!..actually NOT! - Don Muncie 05-Dec-2008 20:32:23 (3)

Re: 1966 Merc 1000...Serial Number?..1965!..actually NOT! - Frank 05-Dec-2008 23:52:26 (2)

Re: 1966 Merc 1000...Hey Frank - Don Muncie 06-Dec-2008 12:27:20 (1)

Re: 1966 Merc 1000... - frank jr 06-Dec-2008 14:32:57 (0)

Re: 1966 Merc 1000...Serial Number?..1965! - Sam Cullis 05-Dec-2008 06:12:10 (1)

Re: 1966 Merc 1000...Serial Number?..1965! - Don Muncie 05-Dec-2008 09:20:54 (0)

Try an inline six with just your fingers - Shawn 07-Dec-2008 15:16:03 (1)

Re: Try an inline six with just your fingers - Fastjeff 07-Dec-2008 17:11:03 (0)

Re: Crank in neutral..... - David Woodell 05-Dec-2008 11:05:34 (1)

Re: Crank in neutral..... - LarryR 06-Dec-2008 09:42:13 (0)

Re: A way to avoid Hackers.... - DanK 08-Dec-2008 11:50:26 (1)

Re: A way to avoid Hackers.... - Fastjeff 08-Dec-2008 14:04:29 (0)

Re: 20H Color Questions - David Van Weele 04-Dec-2008 19:57:44 (0)